Crankcase Breather - Honda CTX200 Manual Del Propietário

48
3. Remove the nut (3) and the air cleaner (4).
4. Wash the air cleaner in clean, nonflammable or high
flash point solvent and let it dry thoroughly.
(4)
Never use petrol or low flash point solvents for
cleaning the air cleaner. A fire or explosion could
result.
5. Soak the air cleaner in gear oil (SAE 80 – 90) until
saturated, then squeeze out the excess oil.
6. Install the removed parts in the reverse order of
removal.
(3) Nut
(4) Air cleaner
(3)

Crankcase Breather

(Refer to the Safety Precautions on page 43.
1. Remove the crankcase breather tube plug (1) from
the tube and drain deposits into a suitable
container.
2. Reinstall the crankcase breather tube plug.
Service more frequently when riding in rain, at full
throttle, or after the motorcycle is washed or
overturned. Service if the deposit level can be seen in
the transparent section of the drain tube.
(1)
Owner´s Manual
)
(1) Crankcase breather tube
plug