Publicidad
Idiomas disponibles
Idiomas disponibles
54
3. Roll the motorcycle forward. Stop. Check the drive
chain slack. Repeat this procedure several times.
Drive chain slack should remain constant. If the
chain is slack only in certain sections, some links
are kinked and binding. Binding and kinking can
frequently be eliminated by lubrication.
(1)
4. Roll the motorcycle forward. Stop and place it on its
side stand. Inspect the drive chain and sprockets
for any of the following conditions:
DRIVE CHAIN
* Damaged Rollers
* Loose Pins
* Dry or Rusted Links
* Kinked or Binding Links
* Excessive Wear
* Improper Adjustment
* Damaged or Missing O-rings
(1) Drive chain
SPROCKETS
* Excessively Worn Teeth
* Broken or Damaged Teeth
A drive chain with damaged rollers, loose pins, or
missing O-rings must be replaced. A chain which
appears dry, or shows signs of rust, requires
supplementary lubrication. Kinked or binding links
should be thoroughly lubricated and worked free.
If links cannot be freed, the chain must be replaced.
Damaged sprocket
teeth
Replace
Normal sprocket teeth
Owner´s Manual
Worn sprocket
teeth
Replace
GOOD
Publicidad
