Publicidad
EASY OPERATION
Scale open using ON/OFF
Value of zero is seen on display. O and
weighing plate until it gets ready for weighing operation.
Use sampling operation;
o
Weight put on the scale
o
Piece value is entered using number keys
o
Press "sample" keys and wait
o
Weighing is shown on "g/pc" indicator
o
When all products is put on scale, total piece value is shown on "pc" indicator
o
"C" key use to cancel
To check number of pieces of known weight of the product
o Weight put on the scale
o Unit weight is entered
o Weighing is shown on "g/pc" indicator
o total piece value is shown on "pc" indicator
For "PRINT" operation
o Press "PRINT" key.
DISPLAY AND KEYBOARD
O
Zero Led
: Shows that the weighing plate is empty. Before weighing a
product, be sure that the weighing plate is empty and press "O" key for zero setting if the O
indicator is off. Otherwise error may occur.
Equilibrium Indicator D
: Shows that the load on the weighing plate is well stabled. It
is off while placing or removing the product. If
may be wrong. Therefore, in order to read the weight, wait until
product on the weighing plate.
T
Tare Indicator
: Shows that the tare effects the weighing. It flashes when the
tare is not fixed. It is continuously on when the tare is fixed. (Only for scales with LCD display.)
M
Total Memory Indicator
: It flashes when the total memory is containing a value. It
remains continuously on while the content of the total memory is being displayed.
Sample Defective Led
: Shows that Sample number is less or Sample number is
insufficient.
R
Battery Indicator
: Shows that the battery is used. If Battery indicator is ON,
scale is powered by the battery. If it flashes, it is necessary to charge or change the battery in the
shortest time.
Weighting instrument that designed with using LCD type display modules has four additional battery
indicators for indicating the fullness of the battery and also they have a sliding battery charging
animation mode, which is only activated when the adapter connection is established. While the adapter
connection is not established, the battery frame around the battery indicators appears for indicating the
battery is being used. Just before the battery becomes empty, the battery frame flashes.
Number Keys
: Used to enter unit price or other variables.
C
Key
:Used for zero setting of unit price or other variables.
indicators are ON. Nothing should be placed on
D
indicator goes off, the weight shown on the display
D
symbol appears after placing the
D
- 3 -
T
Key
:Used for accepting the load as tare.
O
Key
: Use for zero setting the scale when the weighing plate is empty.
F
Key
: Used for reaching setting menu and some functions similar to settings.
Sample Key
: Used for entering piece.
Q
Key
: Used for taking printout. (Only for PC or printer options)
W
Key
: Used for adding total memory.
M / X
Key : Used for displaying and deleting total memory.
☼
Key
: Toggles backlight between ON, OFF, ON-OFF (only for LCD displays)
P
Key
: Used for reaching to unit weight lookup table by a single key.
P1
P2
,
...
Keys : Used for reaching unit weight lookup table by a single key.
U
Key
: Used for reaching to programs that are written bottom of the price lookup keys.
FIRST OPERATION
When scale is turn on all segments and symbols are seen. Numbers counting backwards are seen on
display about 10 seconds. After that, maximum capacity and division is seen for a while and scale gets
ready to weigh.
Value of zero is seen on display. O and
weighing plate until it gets ready for weighing operation.
If there is any weight on weighing plate or there is no weighing plate on scale, nnnnn error message
might be seen on display. Be sure that there is no weight on the weighing plate before calling service.
WEIGHING THE PRODUCT
Place the product on the weighing plate. Wait until the
seen on display.
The value "0.000" should appear on the display and also the
when the weighing plate is empty. If the value on the display is not zero(or
press O for zero setting. After establishing zero and balance, proceed to the weighing process.
WARNING: Absolutely not place any load more than maximum capacity of scale. ("Max" value on data
plate)
Product should be placed on weighing plate by hand. Leaving the product from high or throwing it on to
the weighing plate (even the weight is low) scale may be damaged.
To count the products which will be counted it is needed them to be in the same weight and to make this
count work this weight should be known. The weight of one of these counted products is called "unit
weight"
If it is known the unit weight of the product which will count, it can be found with sampling operation.
Sampling operation was explained in the chapter of sampling detail
KNOWN UNIT WEIGHT OF PRODUCT AND COUNTING
o
Enter unit weight by using "0", "1" ... "9" keys
indicators are ON. Nothing should be placed on
D
indicator is on. Weight of the product is
D
and O indicator should be on
D
indicator is not on),
D
COUNTING
(number keys).
- 4 -
Publicidad
