Publicidad
Entered unit weight is read from unit weight display
Calculating piece value flashes in the number display
o
Wait five second after enter unit weight.
Entered unit weight is read from unit weight display
Calculating piece value is read in the number display
SAMPLING OPERATION
Number value of product which is known put on the weighting plate
If sampling operations are done with more product piece, the following count results will be more
correct
Enter number value of product on the plate by using "0", "1" ... "9" keys (number keys)
Press "sample" keys for taking sample operation.
Calculating Unit weight is read from unit weight display.
Calculating piece value is read in the number display
IMPORTANT SUBJECTS ABOUT SAMPLING
o
Unit weight is calculated with sample operations. If sampling operations are done with more
product piece, unit weight will be calculated more correctly.
o
Showing the calculating unit weight, digits that have error probability are flashing during the five
seconds to warn user.
Sampling operation should be done with more products, which are possible, to decrease number of
digits can be effected from error or to leave any of them.
o
There would be insufficient sample error if enough weight is not used in sampling operation. In
that condition, scale does not allow getting sample. During the following 3 seconds it gives sound
warning, during the following 6 seconds sample defective led is on.
o
If unit weight is too light, the result of counting is shown by rolling.(When sensitivity, during the
counting, is not enough to show one by one)
o
The important subject about the unit weight point position
Example : The default point position for a 600 kg scale is "3" . For unit weights bigger than "999,999"
g, point position should be 2,1 or 0
o
The scale can be late while counting the products one by one. Delay can be solved by changing
filter settings. However, results will be different a bit, when the filter settings change. User should find
that which filter will be on or off according to his/her using condition by trying.
User can change filter's value to median (7.1) or average (7.2) in the setting menu (7).
o
If a filter value is on, the probability of difference decreases,
o
If a filter value is off, the probability of difference and it perceive small weight differences rapidly.
Note: When the filter setting is changed, scale must be restarted.
o
For sensitive counting operations, scale should be made working at least 15-20 minutes after its
starting.
REGISTERING THE UNIT PRICE TO PROGRAM KEYS
P1,..., P8keys that you want to save the unit price, at least 3 seconds.
Press one of
A long "Beep" signal is heard. Number of program key you entered to save is seen on unit piece display
for a while.
Press U key to reach the programs placed to the bottom (programs between P16-P30).
- 5 -
USAGE OF EXTRA PROGRAMS (PLU)
There are 250 price lookups. It is possible to reach first 30 programs directly by
other price lookup tables:
Press P key.
o
" PLU "is seen on price display.
o
Enter program number. (For instance; press "7", "1" keys for registering the program number)
Unit price is saved in program 71 is seen on the unit price display.
First, "PLU 71 " should be seen then price to pay should be seen on price display.
Registering the unit price on program keys:
o
Enter price by using number keys.
This price is seen on unit price display.
Press P key at least 3 seconds.
o
Flashing "PLU" is seen on price to pay display.
o
Enter program number (for instance, press "7", "1" keys one by one for program numbered 71)
After 3 seconds long "Beep" signal is going to be heard. Saved program's number is seen on price to
pay display for a while.
WEIGHING WITH TARE
o
Place the tare weight on the weighing plate. Wait until the
Weight of tare can be read from weight display.
Press T key. "tare" is seen on display for a second then value of "
o
display.. NET indicator is ON. T symbol is flashing (only for LCD display). Tare has been weighted.
o
Place the product on weighing plate. Wait until
Product's net weight is seen on display screen.
o
Make empty the weighing plate.
indicator is on. NET and
Wait until the
D
Preset Tare:
o
Tare value can be entered by using numerical keypad.
Press F key, then Press T key.
o
"hand" message is seen on weight display.
Zero value is seen on Weight display.
o
Weight value can be entered by using numerical keys "0","1",..."9".
If 1 kg Tare value will be set for 150 kg weighing instrument, "
Press T key to fix the tare value. In this case tare will not be cancelled when weighing plate is
o
empty.
NOTE: Press T key 2 times for blocking the cancellation of tare. In this case, word "
seen on weight display for a while and tare symbol (only for scale with LCD display) begins to be
continuously ON. To cancel tare, press T key when the weighing plate is empty.
Models with T symbol (for LCD display);
Never ON
: There is no tare
FLASHING
:When weighing plate is empty, tare will be cancelled automatically.
:Tare is fixed. Press T key to cancel it when weighing plate is empty.
Always ON
TOTAL MEMORY TRANSACTIONS
P1
P8
,...,
indicator is on.
D
0.000
indicator is on.
D
T
indicators are off. Tare is cancelled automatically.
1.000
" must be entered.
-tare-
- 6 -
keys. To reach
"is seen on
" is
Publicidad
