EN
Problem
The coffee runs very
slowly into the thermal
jug (6).
A large amount of
steam is produced in
the brewing process.
During use, an
unpleasant smell is
detected.
Warranty and Limitations of Liability
The warranty does not cover faults caused by incorrect handling, calcifi cation, damage or
attempted repairs. The same applies to normal wear and tear.
We do not accept any liability for damage or consequential damage resulting from:
•
failure to follow the operating instructions
•
non-designated use
•
improper or unsuitable handling
•
repairs which are not carried out properly
•
unauthorised modifi cations
•
use of outside parts or spare parts
•
use of unsuitable additional parts or accessories
Keep the original packaging during the warranty period of the device so that the device
can be properly packaged up if it needs to be returned. The warranty claim will lapse if any
damage is caused during transport.
Possible cause
The drip stop (9) is blocked.
The device is furred up.
The coffee powder used is too
fi nely ground.
Too much coffee powder used.
The device is furred up.
The device is being used for the
fi rst time.
The device has previously been
descaled.
Fix
Clean the fi lter insert (10) with
drip stop.
Descale the device.
Use coffee powder with a
coarser grind.
Do not overfi ll the permanent
fi lter (11) / fi lter paper.
Descale the device.
A smell often develops when
new devices are fi rst used. The
smell should disappear once the
device has been used several
times.
Rinse out the device with fresh
water.
24