Descargar Imprimir esta página

Important - Ascaso Dream PID Manual Del Usuario

Ocultar thumbs Ver también para Dream PID:

Publicidad

Idiomas disponibles

Idiomas disponibles

The installer must read this manual
carefully before start-up.
The operator should be an adult and
fully competent person.
Should an anomaly occur, please
contact your distributor.
Start-up
Check that the voltage is the same
as that indicated on the machine
nameplate.
Figure 1
NB!
We recommend using
water with a low mineral content.
The quality of the water will affect the
taste and quality of your coffee as
well as help avoid future malfunctions.
See our especial anti-lime scale filters
(optional).
Make sure that there is enough water
in the tank. Running the machine
without water may damage the pump.
Water levels should be checked
visually.
Versatile model. Place the discharge
nozzle
over the tray
24
NB! On ending the service, the
filter holder pressure
through this nozzle. If not correctly
placed, all the remaining water could
spill outside the tray.
MAN.29 V8 - MANUAL DREAM PID-ONE 2022.indd 27
MAN.29 V8 - MANUAL DREAM PID-ONE 2022.indd 27
Plug the machine into the electrical
socket.
To reduce the risk of injury, do
not drape cord over the counter
top or table top where it can pulle
don by children or tripped over
unintentionally.
When turned on for the first time,
Fill the water
the machine enters start-up mode.
tank with
The pilot light
fresh water
flashes while the machine heats up,
(see figure 1).
until the right temperature is reached.
Check that the
During this process no service can be
water inlet tube
provided.
is immersed in
The screen
the tank.
rise to the pre-set temperature in PID
models.
A) Using the machine for the first
time or after a long interval.
Replacing the water in the circuit.
1. Turn the coffee maker on with the
2. Attach the empty filter holder
3. Press the coffee switch
B) PRIMING.
• If no coffee comes out
• After a period without use
• After making steam
• If the tank has been emptied
The priming procedure should be
11
.
carried out:
1. With the coffee maker on, turn on
is released
7
2. Turn on the water function (3-I)

IMPORTANT

comes on and
6
shows the temperature
21
general switch
in position (I).
2
with a receptacle underneath.
approximately half a tank of clean
water flow through.
the steam tap
.
4
and release some water (a cup)
through the steam wand
ascaso
13
7
and let
1
.
5
27
02/06/2022 8:53:57
02/06/2022 8:53:57

Publicidad

loading

Este manual también es adecuado para:

Dream one