Vox Function; Beep On/Off; Save; Time Out Timer (Tot) - Dynascan V-440 Manual De Instrucciones

2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the channel knob to select
the level of Squelch "0-9".
3.- Press [PTT] to confirm the settings and return to the main menu. Press [FUN] key to save the
changes and exit to main menu (the original setting is "4").

7.4.- VOX FUNCTION:

If the VOX function is activated, if you talk at a higher volume than the preset level, the transceiver
will begin transmiting; if you talk at a lower volume than the preset level, after 2 seconds, the
transceiver will return to receiving status. Both transmission and reception will be automated, so
when the sound volume is high, the sensitivity of the VOX must be set at a high level to prevent
unwanted transmissions.
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys
or turn the channel knob until display the menu 4, the LCD will display
"VOX 04?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select the desired level "OFF, 0-9" for VOX function.
3. Press [PTT] to confirm and return to the main menu. Press [FUN] key to save the changes and
exit to main menu (the original setting is OFF).

7.5.- BEEP ON/OFF:

Pressing any key on the keyboard, it beeps.
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys or turn the channel knob
until display the menu 5, the LCD will display "BP 05?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select "OFF" or "ON".
3.- Press [PTT] to confirm and return to the main menu, the transceiver will
display the icon " ", press [FUN] key to save the changes and exit to
main menu (the original setting is ON).
7.6.- BATTERY SAVE:
This feature helps the transceiver to consume less energy in standby mode.
1.- Press [FUN] key to access the main menu, use the [UP] / [DOWN] keys or turn the channel
knob until display the menu 6, the LCD will display "SAV 06?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select "OFF" or "ON".
3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to
save the changes and exit to main menu (the original setting is ON).

7.7.- TIME OUT TIMER (TOT):

The TOT function is used to prevent a group of using the same channel for a long time period. If the
transmission exceeds the preset time, the transceiver will stop transmitting
and warn you with a sound alert.
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys
or turn the channel knob until display the menu 7, the LCD will display
"TOT 07?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the channel knob to select
"OFF", "60 seconds", "120 seconds" or "180 seconds".
English - 15 -