Repeater Shift (Sft); Offset Frequency Setting (Off); Receiving Ctcss & Dcs Code (Rc); Transmit Ctcss & Dcs Code (Tc) - Dynascan V-440 Manual De Instrucciones

7.16.- REPEATER SHIFT (SFT):

Function only available in full band mode (frequency shift direction is available in the standby
frequency mode).
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys
or turn the channel knob until display the menu 16, the LCD will display
"SFT 16?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select "OFF", "+" (higher frequency), "-" (lower frequency).
3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to save the changes and
exit to main menu (the original setting is OFF).

7.17.- OFFSET FREQUENCY SETTING (OFF):

Function only available in full band mode (frequency shift direction is available in the standby
frequency mode).
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys
or turn the channel knob until display the menu 17, the LCD will display
"OFF 17?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select the desired frequency offset (frequency range available: 00.000 – 50.000
MHz).
3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to save the changes and
exit to main menu.
7.18.- RECEIVING CTCSS & DCS CODE (RC):
You can only modify the CTCSS / DCS codes in full band mode.
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys or turn the channel knob
until display the menu 18, the LCD will display "RC 18?".
2.- Press [PTT] to enter the menu, press the [MONI] key to toggle between
CTCSS and DCS (available in DCS mode), press the [FUN] to change the
direction of the DCS codes, use the [UP] / [DOWN] keys or turn the
channel knob to select the required codes.
3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to save the changes and
exit to main menu.
4.- When you have selected an CTCSS code, the transceiver will display the "CT" icon.
When you have selected an DCS code, the transceiver will display the "DCS" icon.
7.19.-TRANSMIT CTCSS & DCS CODE (TC):
You can only modify the CTCSS / DCS codes in full band mode.
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys or turn the channel knob
until display the menu 19, the LCD will display "TC 19?".
2.- Press [PTT] to enter the menu, press the [MONI] key to toggle between
CTCSS and DCS (available in DCS mode), press the [FUN] to change the
direction of the DCS codes, use the [UP] / [DOWN] keys or turn the
channel knob to select the required codes.
3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to save the changes and
exit to main menu.
4.- When you have selected an CTCSS code, the transceiver will display the "CT" icon.
English - 18 -