Frequency Step Setting; Fm Radio Function; Saving Fm Radio - Dynascan V-440 Manual De Instrucciones

When you have selected an DCS code, the transceiver will display the "DCS" icon.

7.20.- FREQUENCY STEP SETTING:

When you press the [UP] / [DOWN] keys or turn the channel knob, the channels will increase or
decrease according to the preset frequency steps.
1.- Press [FUN] key to enter the main menu, use the [UP] / [DOWN] keys
or turn the channel knob until display the menu 20, the LCD will display
"SFT 20?".
2.- Press [PTT] to enter the menu, use the [UP] / [DOWN] keys or turn the
channel knob to select 5, 10, 6.25, 12.5 or 25 kHz.
3.- Press [PTT] to confirm and return to the main menu, press [FUN] key to save the changes and
exit to main menu (the original setting is 25 kHz).

7.21.- FM RADIO FUNCTION:

1.- Press the [FUN] and [MONI] keys to activate FM Radio function, the transceiver will display
the frequency of the current radio station. The volume can be adjusted with the power knob and
volume knob.
2.- Use the [UP] / [DOWN] keys or turn the channel knob to switch to another radio frequency, or
enter it directly via the numeric keypad (frequency range: 80.00-107.95 MHz).
3.- Press [FUN] key and then the [MONI] key to disable the FM Radio function.

7.22.- SAVING FM RADIO:

1.- Under FM radio mode, select the desired FM radio frequency.
2.- Press [FUN] key, then select a channel number by keypad that you want to save (0-9, 10
channels total).
3.- In frequency mode, press [VFO] key to toggle between full frequency mode and frequency +
channel mode.
Note:
- "0" means channel 10.
English - 19 -