Noise And Vibration Values; Preparations At The Workplace - Hilti TE 60-AVR Manual De Instrucciones

All manuals and user guides at all-guides.com
Single impact energy in accordance with
EPTA procedure 05/2009
Ø Hammer drill bits
ØBreach bits
ØPercussion core bits
ØPCM diamond core bits
Ø drill bits for metal
Ø Drill bits for wood
Chuck

4.2 Noise and vibration values

The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one electric tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the electric tool. However, if the electric tool is used for
different applications, with different accessory tools, or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Prescribe additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values in accordance with EN 60745
Sound power level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration in accordance with EN 60745
Chiseling (a )
h,Cheq
Hammer drilling in concrete (a
Uncertainty (K)
5 Operation

5.1 Preparations at the workplace

CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making any adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Fitting the side handle
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the chuck from the front and into the recess provided.
3. Bring the side handle into the desired position.
4. Tighten the side handle clamping band by turning the handle grip.
18
TE 60­AVR
8.0 J
12 mm ... 40 mm
40 mm ... 80 mm
45 mm ... 100 mm
•/•
10 mm ... 20 mm
10 mm ... 32 mm
TE­Y
)
)
WA
)
pA
)
pA
)
h, HD
3
TE 60-ATC/AVR
8.0 J
12 mm ... 40 mm
40 mm ... 80 mm
45 mm ... 100 mm
42 mm ... 102 mm
10 mm ... 20 mm
10 mm ... 32 mm
TE­Y
TE 60­AVR TE 60-ATC/AVR
107 dB(A) 111 dB(A)
3 dB(A) 3 dB(A)
96 dB(A) 100 dB(A)
3 dB(A) 3 dB(A)
TE 60­AVR TE 60-ATC/AVR
9.5 m/s² 6.0 m/s²
10.0 m/s² 7.0 m/s²
1.5 m/s² 1.5 m/s²