Descargar Imprimir esta página

Home Decorators Collection MAKENNA 52106 Guía De Uso Y Mantenimiento página 13

Ventilador de techo de 1.52 m (60 plg)

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly - Attaching the Final Blade Assembly (continued)
2
Attaching the final decorative frame
Attach the decorative frame (I) to the blade assembly by aligning
the two posts of the decorative frame with the two holes in
the blade. Secure the decorative frame to the blade using the
decorative frame screws (FF). Insert the decorative frame screws
(FF) through the two holes in the blade arm (F) and screw them
into the posts of the decorative frame (I). Align the hole in the tab
at the end of the decorative frame (I) with the frame brace on the
side edge of the blade arm (F) and secure using a frame brace
screw (GG). Make sure all screws are completely tightened.
Once all of the decorative frame pieces are installed, completely
tighten all of the blade arm screws (EE) to secure the blade
assemblies to the fan.
Assembly - Attaching the Light Kit
1
Attaching the light kit assembly
Remove one screw (TT) from the support plate, and loosen,
but do not remove, the other two screws.
Connect the wires from the light kit assembly (J) to the wires
from the fan motor assembly (E) by connecting the molded
adaptor plugs together. Carefully tuck all wires and splices
into the switch cup.
Push the light kit assembly (J) up to the support plate so that
the two loosened screw heads fit into the keyhole slots. Turn
the light kit fitter assembly (J) clockwise to secure.
Re-install the screw (TT) that was removed in the first step.
Make sure all the screws are firmly tightened.
2
Attaching the light kit pan
and shade assembly
WARNING: Do not overtighten when installing the light kit pan
and shade assembly. Allow the glass shade assembly to cool
completely before removing.
Place the light kit pan and shade assembly (K) into the light
kit assembly (J), aligning the three flat areas on the top of the
flange of the glass shade (K) with the three raised dimples in
the light kit assembly (J).
Turn the glass shade clockwise until it stops.
13
Please contact 1-800-986-3460 for further assistance.
FF
GG
I
F
E
J
TT
J
K
HOMEDEPOT.COM/HOMEDECORATORS
FF

Publicidad

loading

Este manual también es adecuado para:

1005 819 928