Publicidad
Idiomas disponibles
Idiomas disponibles
2-2. Notes
2-2-1. Read the operation manual carefully
before operation, in order to avoid endangering
the personal safety and meter damage,
we need to operate in accordance with the
specification requirements.
2-2-2. Before opening back cover to replace
batteries, remove test leads and disconnect
meter from any circuits being measured.
Water is forbidden to leak into the meter cover
inside.
2-2-3. Do not operate the meter with the cover
removed or the case open;
2-2-4. Do not input limit over-ranged.
2-2-5. Do not input voltage value at resistance
range.
2-2-6. The power switch should set to OFF
after finishing measurement;
2-2-7. For storing a long time, remove the
battery to avoid battery leakage damage to
internal components;
2-2-8. When working with voltages above
60V DC or 30V AC RMS, which will pose a
shock hazard.
24
Publicidad
