Publicidad
Idiomas disponibles
Idiomas disponibles
4-8. Measurement of capacitance
1) Turn the function switch to range.
2) Connect the red test lead into "VΩ" input
terminal and black test lead into "COM"
terminal. (see Figure.7)
3) If the LCD is not display zero, press REL
to make display as zero.
4) Use the test leads (the read test lead as
"+")to connect the capacitance into "COM"
and" VΩ" teromincal correctly. The LCD will
display capacitance value.
NOTE:
1) Do not input voltage or current signal
under the capacitance range. If there is
display on LCD, press REL to make LCD
display as zero so as to
make sure of accurate
measurement.
2) There is only auto
measuremnt mode
under capaitace range.
3) To protect the unit,
make sure that the
testing capacitanceis
completely discharged.
Figure 7.
36
Publicidad
