Avaly VA-803M Manual De Instrucciones página 33

4-4. Measurement of AC curret
1) Turn the function switch to ACA range
2) Opean the clamp to clamp a conducting
wire and read the display directly. To get
acurate disdplay, it is suggested to put the
conducting wire in the center of the clamp.
(see Figure.3)
NOTE:
1) If not knowing current range of the to-
be—tested object, please turn the function
switch to the highest range, and then turn
to suitable range according to the display.
2) The input current shall not exceed the
current limit. Otherwise, the unit maybe
distroyed.
4-5. Measurement of AC voltage
1) Turn the function switch to ACV range.
Then connect the red test lead into "VΩ"
Figura 4.
input terminal
black test lead into
"COM" terminal.
2) Put the two test leads
on the testing wier with
some distance,
read the display for
tested result.
(See Figure 4.)
and
and
33