Publicidad
Idiomas disponibles
Idiomas disponibles
4-7. Measure of resistance
1) Turn the function switch to Ω range.
Then connect the red test lead into "VΩ"
input terminal and black test lead into
"COM" terminal.
2) Put the two test leads on the testing wier
with some distance, and read the display
for tested result.
NOTE:
1) Before testing the inserted resistor, make
sure that the to-be-tested circuit is power
off and all capacitors are discharged.
2) Do not input voltage under the resistance
range.
3) When the test leads are to the open
circuit, it means it isover testing range and
displays OL.
Figure 6.
(See Figure 6.)
When the test leads
are shorted, there may
be some fragmented
resistance as 1Ω.
35
Publicidad
