Publicidad
Idiomas disponibles
Idiomas disponibles
4)
Display of 200uFrange is stable for
more than 15 seconds.
4-9. Measurement of temperature
Turn the function switch to TEMP range.
Then connect the negative terminal (black)
of thermocouple sensor to the "COM"
terminal and the positive (red) to the
"VΩ" terminal. Put the testing terminal of
thermocouple sensor on or into the testing
object, then read the temperature from the
LCD display.
NOTE:
1) During test, put the unit away from high
temperature, and use the testing terminal of
thermocouple sensor within testing limits.
2) To make sure of accurate testing results,
do no replace the thermocouple sensor
Figura 9.
(See Figure 9.)
randomly.
3) Do not input voltage
under this range.
37
Publicidad
