Electric Problems; Cautions And Warnings; List Of Parts - Create WIND EASY Manual Del Usuario

E LECTRI C P ROB LE MS
• Always turn off the power before repairing the ceiling fan and turn off the circuit breaker
that feeds the power to the light. To avoid possible electric shock, make sure the electricity
is turned off at the fuse box or circuit breaker panel before wiring.
• The fan, mounting bracket, and light kit must be grounded. Make sure all spliced
connections are adequately insulated.
• Check and confirm that all connections are correct and secure. When all electrical
connections are made, store all cables in an orderly fashion.
• Do not attempt to control this fan from any wall switch or remote control that is not
approved by the manufacturer for use with this fan. DO NOT use a solid state controller.
Use of an unapproved remote control or wall switch will void the warranty.
• Do not connect the ceiling fan to a dimmer or dimmer.
• Use only CREATE replacement parts.
• To reduce the risk of personal injury, connect the fan directly to the building support
structure in accordance with these instructions and use only the supplied hardware.
• To avoid possible electrical shock, before installing your fan, disconnect power by turning
off the circuit breakers in the outlet box and associated wall switch.
• All wiring must be in accordance with national and local electrical codes and ANSI / NFPA
70. If you are unfamiliar with wiring, contact a qualified electrician.
• To reduce the risk of personal injury, do not bend the blade clamping system when
installing, balancing, or cleaning the fan. Never insert foreign objects between the rotating
fan blades.
• To reduce the risk of fire, electric shock, or motor damage, do not use a solid state speed
control with this fan. Use only CREATE speed controls
Note: The important safety precautions and instructions in this manual are not intended to
cover all possible conditions and situations that may occur. It should be understood that
common sense and caution are necessary factors in the installation and operation of this
fan.
Mounting
bracket
Expansion
bolts

CAUTIONS AND WARNINGS

LIST OF PARTS

Floron Blade hitch
Motor
Shank
Tulipa
Blades
Chains
E NGLI SH
7