Electric Connection; Installation Instructions; Installation Preparation - Create WIND EASY Manual Del Usuario

• Make the connection between the cables of the electrical installation of your home and the
cables of the fan motor following the instructions below.
Take
ground
L
N
• Mark the correct position of the holes and fix the mounting bracket using the screws with
metal plugs or screws and washers suitable for the type of ceiling chosen.
• Check the correct installation of the bracket before hanging the fan. This plate must
support the full weight of the fan.
INSTALL ATI ON PRE PAR AT I O N
• To avoid personal injury and damage,
make sure the place to hang the blades
leaves a clearance of 2.3 m from the
ground and 76 cm from any walls or
obstacles.
• Make sure the mounting bracket is
securely attached
structure and can support the full weight
of the fan.
E NGL I SH
8

ELECTRIC CONNECTION

INSTALLATION INSTRUCTIONS

to the building
Take
ground
Light L
Motor L
Neutral N
76 cm of
separation
between
the wall or
obstacle.
2.3 m from
the blades
to the
ground