DANGER – Working with the machine without appropriate preparation and
disregarding of instructions. Shut down the machine properly and let it cool
down to the ambient temperature.
NOTICE – Special instructions apply for the repair of explosion-proof
machines. Retrofits or modifications of the machine can affect the explosion
protection. Therefore, retrofits or modifications are allowed upon agreement
with the manufacturer only.
The explosion-proof machine is designed in the type of protection "c" constructive safety.
All work executed on the machine, influencing the explosion protection, e. g. repairs with
mechanical machining, require an approval of an authorized expert or have to be done by the
manufacturer. The internal structure must remain unmodified.
The manufacturer service is available for all maintenance, repair and assembly work, as well
as for damages.
Unused machines and machine tools should be kept in a dry, closed room.
Keep them free from damaging influences such as damp, frost or large temperature
fluctuations as well as mechanical damage.
Always store the machine in a way that important machine instructions, e. g. on stickers and
signs, are legible.
Dispose worn out/defective machine tools according the local/national regulations. Fully
disassemble machine for the necessary disposal. Separate materials according to local
environmental specifications. Dispose environmentally hazardous greasing, cooling or cleaning
agents in order to avoid environmental contamination.
When working on or with the equipment, it is imperative to observe all legal requirements in
regards to waste-disposal and proper recycling.
In particular during installation, repair and maintenance work, water damaging agents, such
as
• lubricating grease and oil,
• hydraulic fluid,
• coolant,
• solvent containing cleaning agents must not leak into the ground or reach
the sewage system.
These materials must be stored, transported, contained and disposed of in
suitable containers!
STORAGE
DISPOSAL
ENVIRONMENTAL REGULATIONS
51