IKEA STJARNSTATUS Manual Del Usuario página 11

EN
Door

NOTE
Product is shipped with doors adjusted to
the lowest position on the hinges.
To make final door height adjustments:
1. Open freezer drawer to access hinges
for fresh food doors.
2. Insert 6 mm Allen
of the lower hinge (included with unit).
To lower door: turn adjustment
screw counterclockwise if looking at
the door from below.
To raise door: turn adjustment
screw clockwise if looking at the
door from below.
Flipper Mullion
Adjust Flipper Mullion for proper connection
with the mullion guide by ensuring the
flipper mullion is folded and perpendicular
to the fresh food door. If the mullion guide
is not in the correct position, it could prevent
the door from closing completely.
Door
wrench into the shaft
TM
INSTALLATION
To adjust the flipper mullion:
1. Loosen the 2 screws located on the
flipper mullion hinge.
Flipper
Mullion
Screws
Adjusting Flipper Mullion Screw
2. Adjust flipper mullion height. For proper
connection with the flipper mullion
guide, there should be a separation
about the thickness of a coin (0.060
inches, or 1.5 mm) between the guide
and flipper mullion.
Flipper
Mullion
Adjusting Flipper Mullion Height
3. Retighten screws.
WRONG
Mullion
Guide
Thickness
of a Coin
11