Screens; Filling Chamber; Removing The Lower Screen; Cleaning - STORZ & BICKEL Mighty Modo De Empleo

Disregarding this may allow plant
i
particles to enter the Cooling Unit,
so blocking this or be inhaled.

7.2 Screens

X After each vaporization, clean the
Screens with the enclosed Clean-
ing Brush.

7.3 Filling Chamber

It is necessary to clean the filling
i
chamber as soon as the lower
Screen is clogged.

7.3.1 Removing the lower Screen

X Remove the lower Screen by press-
ing it along the groove in the Filling
Chamber using the Filling Cham-
ber Tool. This causes the lower
Screen to bulge and detach from
the groove.

7.3.2. Cleaning

X Clean the filling chamber with a
cotton swab soaked in isopropyl
alcohol.
Make sure that no isopropyl alcohol
i
drips into the interior of the device.

7.3.3 Installing the lower Screen

X Curve the lower Screen.
X Insert the lower Screen into the fill-
ing chamber with the curved side
facing upwards.
7 C L E A N I N G
X Using the Filling Chamber Tool,
press the screen flat into the pro-
vided groove.
7.4 Vaporizer and Power Adapter
NOTICE
Material damage caused by
improper cleaning
Water may penetrate and damage
the Vaporizer or Power Adapter
• Do not immerse in water or
other liquids
• Do not clean with direct water
or steam jet or compressed
air
X Disconnect the Power Adapter
from the power source.
X Switch off the Vaporizer.
X Clean the housing of the Vapor-
izer and the Power Adapter only
dry or at most with a damp cloth
if necessary.
58