Publicidad
Idiomas disponibles
Idiomas disponibles
The measuring tool is intended for determining and checking precise horizontal and vertical
(RL25HV only) lines. The measuring tool is suitable for indoor and outdoor use.
Rotational Laser Level
Working range (diameter)
– without laser receiver, approx.
– with laser receiver, approx.
1, 2
Leveling Accuracy
Self-leveling range, typically
Leveling duration, typically
Rotational speed
Aperture angle
3
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam Ø at the exit opening,
approx.
Tripod mount (horizontal)
Batteries (alkali-manganese)
Operating life time, approx.
–Batteries (alkali-manganese)
Weight
Dimensions (length xwidth xheight)
Degree of protection
1) at 20°C (68º F) and a temperature drift coefficient of ±1 arc sec per 1º C must be considered for any temperature deviation
above or below standard temperature. It is recommended that you periodically check your rotary laser upon receipt and peri
odically thereafter to ensure accuracy is maintained.
2) alongside the axes
3) It is the user's responsibility to check the rotary laser accuracy if the operating temperature is exceeded.
Please observe the article number on the type plate of your measuring tool. The trade names of the individual measuring tools may
vary. The measuring tool can be clearly identified with the serial number 13 on the type plate. The rotary laser is designed to with-
stand a drop test of 1M. However it is the user's responsibility to check the laser'saccuracy after any type of impact such as a drop.
All manuals and user guides at all-guides.com
Intended Use
Rotational Laser Level
Technical Data
RL25H
2000 ft (609.6 m)
3/32 in @ 100 ft (±0.08mm/m)
±8% (± 5°)
15 s
600 rpm
+14°F to +122°F (–10 to +50°C)
-4°F to +158°F (–20 to +70°C)
90%
2
635nm, <1mW
.2 in (5mm)
5/8"–11
3 x 1.5v (D)
85h
5.15 lbs
7.3 x 8.6 x 7.8 in (185x218x198mm)
IP56 (dust-proof and protected
against water jets)
-11-
RL25HV
200 ft (60 m)
2000 ft (609.6 m)
3/32 in @ 100 ft (±0.08mm/m)
±8% (± 5°)
15 s
0, 150, 300, 600 rpms
10/25/50 degrees
+14°F to +122°F (–10 to +50°C)
-4°F to +158°F (–20 to +70°C)
90%
3R
635nm, >1mW
.2 in (5mm)
5/8"–11
3 x 1.5v (D)
55h
5.18 lbs
7.3 x 8.6 x 7.8 in (185x218x198mm)
IP56 (dust-proof and protected
against water jets)
Publicidad
