Publicidad
Idiomas disponibles
Idiomas disponibles
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
DO NOT operate the laser tool around
children or allow children to operate
the laser tool. Serious eye injury could
result.
DO NOT use measuring tools,
attachments and accessories outdoors
when lightening conditions are present.
Electrical safety
Batteries can explode or leak, cause
injury or fire. To reduce this risk,
always follow all instructions and
warnings on the battery label and
Replace all old batteries at the same
time with new batteries of the same
brand and type.
DO NOT mix battery chemistries.
Dispose of or recycle batteries per
local code.
DO NOT dispose of batteries in fire.
Keep batteries out of reach of children.
Personal safety
Stay alert, watch what you are doing
and use common sense when operating
a tool. Do not use a tool while you are
tired or under the influence of drugs,
alcohol or medication. A moment of
inattention while operating a tool may
result in serious personal injury or
incorrect measurement results.
Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
DO NOT use the laser viewing
glasses as safety goggles. The laser
viewing glasses are used for improved
visualization of the laser beam, but they
do not protect against laser radiation.
DO NOT use the laser viewing
glasses as sun glasses or in traffic.
The laser viewing glasses do not afford
complete UV protection and reduce color
perception.
DO NOT use any optical tools such
as, but not limited to, telescopes or
transits to view the laser beam. Serious
eye injury could result.
DO NOT stare directly at the laser beam
or project the laser beam directly into
the eyes of others. Serious eye injury
could result.
Use caution when using measuring
tools in the vicinity of electrical
hazards.
Magnets
All manuals and user guides at all-guides.com
package.
Remove the batteries from the tool
when not using it for extended periods.
When storing for extended periods, the
batteries can corrode and discharge
themselves.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries.
Keep the tool and laser target away
from cardiac pacemakers. The magnets
of the tool and laser target plate generate
a field that can impair the function of
The effect of the magnets of the tool and
laser target plate can lead to irreversible
data loss.
Do not hold the measuring tool close to
your ear! The A-weighted sound pressure
level of the audio signal at one meter
distance is 75-85dB(A). Serious injury
could result.
Use the correct tool for your
application. The correct tool will do the
job better and safer.
Do not use the tool if the switch does
not turn it on and off. Any tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Store idle tool out of the reach of
children and do not allow persons
unfamiliar with the tool or these
instructions to operate the tool. Tools
are dangerous in the hands of untrained
users.
Maintain tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the operation. If damaged, repair
tool before use. Many accidents are
caused by poorly maintained tools.
Use the tool, accessories, etc., in
accordance with these instructions
and in the manner intended for the
particular type of tool, taking into
-9-
SAVE THESE INSTRUCTIONS.
cardiac
pacemakers.
Keep the tool and
laser target away from
magnetic data medium
and magnetically-sensitive
equipment.
Noise Information
Use and care
Publicidad
