Publicidad
Idiomas disponibles
Idiomas disponibles
The numbering of the product features
shown refers to the illustration of the
measuring tool on the graphic page. (see
pages 3 – 6)
1. Reception lens for remote control
2. On/Off button
3. Automatic leveling indicator
4. Button for rotational operation and selection
of the rotation speed (RL25HV)
5. Button for line operation and line length
selection (RL25HV)
6. Charge-control indicator
7. ADS (Anti-Drift system) indicator
8. ADS button
9. Lower direction button
10. Upper direction button
11. Indicator for single-axis slope operation
12. Button for single-axis slope operation
13. Exit opening for laser beam
14. Variable laser beam
15. Plumb beam (RL25HV)
16. Battery compartment
17. Nut for battery compartment/battery pack
Power Supply
The measuring tool uses (3) D Alkaline
batteries, which are inserted in battery
compartment 16.
Operation: To insert the batteries loosen nut
17 and remove the battery compartment 16.
When inserting the batteries pay attention to the
correct polarity according to the representation
on the inside of the battery compartment.
Always replace all batteries at the same time.
Do not use different brands or types of batteries
together.
Mount the battery compartment 16 again.
All manuals and user guides at all-guides.com
Product Features
18. Tripod mount 5/8"
19. Serial number
20. Laser warning label
21. Laser detector*
22. Construction laser measuring rod*
23. Tripod**
24. Remote control*
25. Laser viewing glasses*
26. Wall mount/alignment unit**
27. Case*
28. Laser target plate*
* The accessories illustrated or described are
not included as standard
*Illustrated accessory may be optional on some
models and not included in standard package.
Assembly
Pay attention that the nose of the battery
compartment engages in the corresponding
recess in the housing (see illustration on the
graphic pages). Firmly tighten the battery
compartment with nut 17.
In case the batteries have been inserted
incorrectly, the measuring tool cannot be
switched on. Insert the batteries with correct
polarity.
-12-
Publicidad
