Fulgor Milano FBC 345 TNF ED Manual De Usuario página 25

WARNING
• Leave to stand for at least 4 hours
before switching on the product,
to allow compressor oil to settle if
transported horizontally.
• This freezer must only be used for
its intended purpose (i.e. storing
and freezing of edible foodstuff).
• Before performing any operation,
unplug the power cord from the
power socket.
• On delivery, check to make
sure that the product is not
damaged and that all the parts
and accessories are in perfect
condition.
• If in the refrigeration system a
leak is noted, do not touch the
wall outlet and do not use open
flames. Open the window and
let air into the room. Then call a
service center to ask for repair.
• Do not use extension cords or
adapters.
• Do not excessively pull or fold the
power cord or touch the plug with
wet hands.
• Do not damage the plug and/or
the power cord; this could cause
electrical shocks or fires.
• If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified person in order
to avoid a hazard.
• Do not place or store inflammable
and highly volatile materials such
as ether, petrol, LPG, propane gas,
aerosol spray cans, adhesives,
pure alcohol, etc. These materials
may cause an explosion.
WARNING
• Do not use or store inflammable
sprays, such as spray paint, near
the refrigerator. It could cause an
explosion or fire.
• Do not place objects and/or
containers filled with water on
the top of the appliance.
• We do not recommend the use of
extension leads and multi-way
adapters.
• Do not dispose of the appliance
on a fire. Take care not to
damage, the cooling circuit/pipes
of the appliance in transportation
and in use. In case of damage
do not expose the appliance to
fire, potential ignition source and
immediately ventilate the room
where the appliance is situated.
• The refrigeration
positioned behind and inside the
refrigerator contains refrigerant.
Therefore, avoid damaging the
tubes.
• Do
not
appliances inside
storage compartments of the
appliance, unless they are of
the type recommended by the
manufacturer.
• Do not damage the refrigerant
circuit.
• Do not use mechanical devices
or other means to accelerate
the defrosting
than those recommended by the
manufacturer.
• Do not touch internal cooling
elements, especially with wet
hands, to avoid cracks or injuries.
system
use electrical
the food
process, other
EN
3