Scrapping Old Appliances; Conformity; Energy Saving - Fulgor Milano FBC 345 TNF ED Manual De Usuario

EN

Scrapping old appliances

This appliance is marked according to the European directive
2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE).
WEEE contains both polluting substances (which can cause
negative consequences for the environment) and basic
components (which can be re-used). It is important to have
WEEE subjected to specific treatments, in order to remove and
dispose properly all pollutants, and recover and recycle all
materials.
Individuals can play an important role in ensuring that WEEE
does not become an environmental issue; it is essential to
follow some basic rules:
- WEEE should not be treated as household waste;
- WEEE should be handed over to the relevant collection points
managed by the municipality or by registered companies.
In many countries, for large WEEE, home collection could
be present.
In many countries, when you buy a new appliance, the old
one may be returned to the retailer who has to collect it free
of charge on a one-to-one basis, as long as the equipment is
of equivalent type and has the same functions as the supplied
equipment.

Conformity

By placing the mark on this product, we are confirming
compliance to all relevant European safety, health and
environmental requirements which are applicable in legislation
for this product.
6

Energy Saving

For better energy saving we suggest :
• Installing the appliance away from heat sources and not
exposed to direct sunlight and in a well ventilated room.
• Avoid putting hot food into the refrigerator to avoid
increasing the internal temperature and therefore causing
continuos functionaliting of the compressor.
• Do not excessively stuff foods so as to ensure proper air
circulation.
• Defrost the appliance in case there is ice to facilitate the
transfer of cold.
• In case of absence of electrical energy, it is advisable to
keep the refrigerator door closed.
• Open or keep the doors of the appliance open as little as
possible
• Avoid adjusting the setting to temperatures too cold.
• Remove dust present on the rear of the appliance