• The freezer compartments are designed to store only frozen
food.
• Never put hot or warm foods in the freezer, allow them to
cool fully before putting them into the freezer.
• Follow the instructions on the food packaging for storage
of frozen food. If no information is provided, foods should
not be stored for more than three months after the purchase
date.
• Store food in small packages (ideally less than1kg).This
reduces the freezing time and improves the quality of the
food after thawing.
• Wrap food before putting into the freezer. To stop the
wrapping sticking together, ensure it is dry.
• Label the food before freezing with information including
type of food and dates of storage and expiry.
• Once food is thawed, it must not be refrozen. Only defrost
as much food as is required to prevent wastage.
• Bottled or canned drinks should not be stored in the
freezer compartments as they could explode.
• The maximum amount of fresh food that can be frozen
within a 24 hour period is 2.6kg.
• Do not attempt to freeze more than the maximum amount.
My Zone drawer humidity adjustment
The temperature inside the My Zone drawer can be regulated
from +3˚C to – 3˚C. This is the ideal drawer to store meat and
fish. Moreover you can regulate the humidity level:
• High humidity by keeping the adjustment slider closed (fully
to the left).
• Low humidity by keeping the adjustment slider open (fully
to the right).
Storage
The fridge section is for short term food storage. Although low
temperatures can be maintained, extended periods of food
storage is not recommended.
As the cold air circulates within the fridge, the temperature can
vary between the different sections. As such, foods should be
stored in different sections according to type.
Fig. 1
1. Butter, cheeses etc.
2. Food in jars and bottles
3. Drinks, e.g. milk
4. Cooked food
5. Yogurts, preserves etc.
6. 75cl bottles or ready meals etc.
7. Fruit and vegetables
8. Fresh meat and fish/fruit and vegetables
The fridge shelves can be moved according to the storage
requirements within the fridge section. To move the shelf, lift up
the rear section and then pull it outwards.
To replace, slide the shelf back into the slot, and then lower the
rear section.
The most energy-saving configuration requires drawers, food
box and shelves to be positioned in the product, please refer
to the above pictures.
4 - Freezer use
EN
9