CGM 3300I Manual Del Operador página 55

CAUTION
Allow the generating set to cool for at least
two minutes before removing fuel cap when
adding fuel.
Loosen the fuel cap slowly to relieve any
pressure in the tank.
5 Generating set grounding
The generating set must be properly connected
to an appropriate ground. It helps prevent
electrical shock if a ground fault condition
exists in the generating set or in connected
electrical devices, especially when the unit is
equipped with a wheel kit.
Proper grounding also helps dissipate static
electricity, which often builds up in ungrounded
devices.
Electrical Shock
Failure to properly ground the generating set
can result in electric shock
A ground terminal has been provided on the
generating set. For remote grounding, connect
of a length of heavy gauge (4mm
between the generating set ground terminal and
a copper rod driven into the ground.
Local electrical codes may also require proper
grounding of the unit. We strongly recommend that
you consult with a qualified electrician for grounding
requirements in your area.
6
Remove the battery maintenance cover, connect the
battery terminal to the motor terminal, and reinstall
the maintenance cover.
DANGER
2
) copper wire
17
Battery connection (If applicable)