CGM 3300I Manual Del Operador página 60

ELECTRICAL SHOCK
To reduce the risk of electrical shock, DO NOT
use electrical cords that are worn, frayed, bare
or otherwise damaged.
DO NOT touch bare wires or receptacles.
DO NOT handle generating set or electrical
cords while standing in water, while barefoot,
or while hands or feet are wet.
Loading capacity
WARNING
DO NOT overload the generating set.
Exceeding the generating set's capacity can
damage the generating set and/or electric
devices connected to it.
You must make sure your generating set can
supply enough rated (running) and (starting)
watts for the electrical devices at the same time.
Follow these simple steps to calculate the running
and starting watts necessary for your purposes.
a. Count the electrical devices you will power at
the same time.
b. The amount of power you need to run with
the devices is the total rated (running) watts
of these items.
c. Starting power is the power needed shortly
when electric devices start. Since not all
devices start at the same time, starting power
can be estimated by the maximum power of
all devices plus the total power counted in
step b.
DANGER
It is necessary to equip with circuit protector or
switch to isolate the generating set from the
electric utility when the generating set is mainly
used for backup. Failure to isolate the generating
set from the power utility may result in injury or
death to electric utility workers and damage to the
generating set due to back feed of electrical
energy.
Wattage Reference Chart
Electric equipment
Electric
tooling
22
WARNING
Rate
power(W)
Tablet TV
80
27"
Energy
5-50
saving lamb
Electric
1000
cooker
Computer 250
Electric fan 50
Washing
250
machine
Refrigerator 50
Air-
1600
conditioner
Electric
1000
hammer
Impact
3000
Hammer
Water pump 2200
Electric
welding 5000
machine
Air
5000
compressor
Starting
power(W)
100
5-50
1000
250
100
500
300
3200
1500
6000
5000
7500
10000