Generating Set Maintenance; Engine Maintenance - CGM 3300I Manual Del Operador

2.

Generating set maintenance

Use a damp cloth to clean exterior surfaces of the
generating set. Use a soft brush to clean the dirt and
oil.
Use an air compressor (25 PSI) to clear dirt and
debris from the generating set.
Inspect all air vents and cooling slots to ensure that
they are clean and unobstructed.
WARNING
DO NOT use water to clean the generating set.
Water can enter the generating set through the
cooling slots and damage the generating set
windings.
WARNING
It is forbidden to tamper with the generator in
any of the above ways.
Do not tamper with the inverter speed. The
generator is set to the correct rated frequency and
voltage before factory. Tampering with the
factory settings of the inverter without
authorization will void your product warranty.
3.

Engine maintenance

Engine oil
Only use four-stroke engine oil of SJ, SL or
equivalent level which are in accordance with or
higher than API standard.
Check the API label on oil bottle or other
container, and make sure the "SJ, SL" or
equivalent level letter is in the label.
SAE 10W-30 is recommended for general, all-
temperature use. Other viscosities shown in the
chart may be used when the average temperature
in your area is within the indicated range.
Ambient temperature
Oil capacity (rated):
See parameters
Add oil
a. Place the engine on a level Surface.
b. Remove the air filter maintenance cover and
dipstick, wipe it clean.
27