Circuit breaker
The circuit breaker protects the generating set
against electrical overloads.
Parallel kit terminal
It is used for parallel operation with another inverter
(parallel kit sold separately).
Push-button start
(If applicable)
You can start the generator by pressing the button
with your finger.
Fuel tank cap
Remove the fuel tank cap by rotating it
anticlockwise.
Ventilation knob (If applicable)
The fuel tank cap is equipped with the ventilation
knob to prevent leakage of fuel. The ventilation
knob must in "ON" position when operating
generating set. Because this makes the fuel be
injected to the carburetor and drive the engine. To
avoid fuel leakage, turn it in "OFF" position when
carrying or not use the generating set.