Dipstick
c.
Add recommended oil to the upper limit.
Upper limit
Lower limit
d.
Fully tighten the dipstick.
e.
Dispose of used oil at an approved waste
management facility.
CAUTION
Oil level check
Reinstall dipstick into hole; rest on oil fill neck.
DO NOT thread cap into hole.
e.
Properly dispose of any used oil at an approved
waste management facility.
Change oil
CAUTION
Change oil when the engine is warm from
operation. The oil temperature can reach up to
140°C in the warm state, and careful operation
should be taken when changing the oil to prevent
burns.
a.
Place the machine on a level surface which is
300mm higher than the ground.
b.
Remove the oil maintenance cover.
c.
Place the waste oil box on the ground.
d.
Remove the oil dipstick, and tilt the machine to
pour the oil.
Dipstick