MAHLE X20 System Guia Del Usuario página 25

MAHLE X20 System · Service
026
V.1.0.1 - 04/2022
51
COMMUNICATION_FAULT_LOST_FRAME_-
JOB_1
Warning, communication problem. If there
is no recovery, go to your dealer.
52
DRIVER_ERROR_VG_UNDERVOLTAGE
Motor controller voltage too low, charge
the battery. If there is no recovery, go to
your dealer.
53
DRIVER_ERROR_OVERTEMPERATURE
Motor controller temperature too high. Cool
down the system.
54
DRIVER_ERROR_OVERCURRENT
Motor controller current too high, reduce
the assistance. If there is no recovery, go to
your dealer.
55
DRIVER_ERROR_VDD_UNDERVOLTAGE
Motor controller voltage too low, charge
the battery. If there is no recovery, go to
your dealer.
CADENCE_INVALID
56
Cadence sensor error. If there is no
recovery, go to your dealer.
57
SPEED_PLAUSABILITY
Speed sensor error. If there is no recovery,
go to your dealer.
59
SPEEDS_PLAUSABILITY
Speed sensor error. If there is no recovery,
go to your dealer.
61
HARD_MOTOR_BLOCK
Motor error. If there is no recovery, go to
your dealer.
62
EXCEED_TICK_SHIFT
Motor controller FW error. Re-start the
eBike. If there is no recovery, go to your
dealer.
CAN_UDS_DLC
67
Communication problem. Restart the
system and review connections. If there is
no recovery, go to your dealer.
PHASE_ZEROING_ERROR
69
Power system error. If there is no recovery,
go to your dealer.
70
DU_UNDER_TEMP
Motor under temperature. Please go to a
warmer place.
71
DU_OVER_TEMP
Motor over temperature. Please go to a
cooler place.
72
DU_SNS_UNDER_TEMP
Motor sensors under temperature. Please
go to a warmer place.
DU_SNS_OVER_TEMP
73
Motor sensors over temperature. Please go
to a cooler place.
GEARSET_OVERSPEED
74
Motor over speed. Please reduce the
speed of the eBike. If there is no recovery,
go to your dealer.
UNBALANCE_PHASE_CURRENT
77
Power system error. If there is no recovery,
go to your dealer.
CAN_OFF_LONG
79
Communication error. If there is no
recovery, go to your dealer.
POWER_STAGE_ERROR
80
Power system error. If there is no recovery,
go to your dealer.
ANALOG_INPUT_ERROR
84
Motor controller sensors error. If there is no
recovery go to your dealer.
85
MC_UNDER_TEMP
Motor controller under temperature. Please
go to a warmer place.
MC_LIB_ERROR
86
Motor controller internal error. Re-start the
system. If there is no recovery go to your
dealer.
87
TCS_POWER_SUPPLY_ERROR
Torque and cadence sensors power supply
error. Re-start the eBike. If there is no
recovery, go to your dealer.
MOTOR_CONNECTION_ERROR
88
Motor error. Restart the eBike. If it doesn't
reset, contact your dealer