Disposal; After Sale Service; Warranty / Liability - SATA jet 4600 B Manual De Servicio

Operating Manual SATAjet 4600 B RP/HVLP
Malfunction
Spray gun leaks from
the fluid tip ("fluid tip
aperture").

11. Disposal

Dispose of completely emptied spray gun as a recyclable product. To
prevent damage to the environment, dispose of residual spray medium
properly and separately from the spray gun itself. Comply with local regu-
lations!

12. After Sale Service

Accessories, spare parts and technical support may be obtained from
your SATA dealer.

13. Warranty / Liability

The SATA General Conditions of Sale and Delivery and further contrac-
tual agreements, if applicable, as well as the valid legislation at the time
apply.
SATA cannot be held responsible especially in the following
cases:
• When the operating instructions are disregarded.
• When the product is used in other than the intended ways of usage.
• When untrained staff is employed.
• When no personal protection equipment is worn.
• When no original accessories and spare parts are used.
• When the product is manipulated, tampered with or technically modi-
fied.
• In case of normal wear and tear.
• In case when the product has been exposed to untypical shockloads
and impacts during usage.
• Assembly and disassembly
Cause
Contamination be-
tween paint needle tip
and fluid tip.
Damaged nozzle set.
Corrective action
Clean fluid tip and
paint needle, observe
chapter 8.
Replace nozzle set,
chapter 9.
EN
47