EN
N°
Description
1
Lift arms + lift cylinders, used to lift / lower the platform,
the wheelchair passenger and / or operator.
2
Platform, carries the load or wheelchair during lifting /
lowering. The platform surface incorporates an anti-slip
protection profiling.
3
Safety rails, to be manually raised and locked in
vertical position prior to accessing the platform, and to
be restored manually when ending the use. They
provide a hand-hold for the platform occupant.
4
Automatic roll-stop at the rear edge of the platform. Is
lowered automatically when the platform touches the
ground. Is raised automatically when the platform is
lifted off the ground.
Prevents wheeled goods or the wheelchair from slow,
unexpected rolling off the platform during the lifting /
lowering.
5
Flashing platform lights, to signal the platform in
surrounding traffic.
6
Automatic bridge plate to the loading floor of the
vehicle.
Functions as toe-guard during the lift cycle. Is lowered
automatically to horizontal position when the platform
arrives at floor level, creating a smooth and safe
passage between the platform and the vehicle floor.
7
Outboard edge of the platform.
8
Inboard edge of the platform.
9
Hydraulic pump unit, steering all functions. Contains
the electric motor driving the hydraulic pump and the
control valves.
...
...
DHOLLANDIA
Fig. 3.1
1
A17
6
8
5
3
7
2
4