Publicidad
EN
In order to prevent premature wear or damage of the lift,
possibly resulting in accidents with injuries, it is important
to follow the instructions below.
The nominal capacity is indicated on the identification
sticker and on the CE certificate of conformity [fig. 5.5.2].
It is the maximum weight allowed to be carried on the
platform in the best possible circumstances. This is under
the following conditions [fig. 5.5.1]:
1. In longitudinal direction: the load or wheelchair is
placed as close as possible to the floor of the vehicle
2. In lateral direction: the load or wheelchair is placed at
a central position between the lift arms (not out of cen-
tre to one of the sides op the platform).
Whenever the loading circumstances deviate from these
best possible conditions, the safe working load (=SWL)
decreases by 30%.
The dimensions of the wheelchair should never exceed
those of the platform. The wheelchair should never pro-
trude beyond the perimeter of the platform.
DHOLLANDIA
Fig. 5.5.2
!
A45
DHCH003.4 350kg 1200mm
!
Publicidad
