Repairs; Spare Parts; Decommissioning; Disassembly And Exchange - Bosch Rexroth KU 1 Instrucciones De Montaje

3 842 531 106/2013-04 | TS 1
9.4

Repairs

9.4.1 Required tools
• Hexagon wrenches (open-end) WS 8, WS 10, WS 13, WS 17, WS 19,
WS 24
• Hex socket wrenches WS 3, WS 4, WS 5, WS 6
9.4.2 Belt section: Exchanging the motor and/or gear
How to exchange the motor and/or gear is described in the assembly
instructions for the BS 1 belt section, 3 842 522 488, and the BS 1/
T belt section, 3 842 522 489.
9.5

Spare parts

For spare parts, see the MTparts spare parts list, 3 842 529 770.
10

Decommissioning

The product is a component that does not have to be decommissioned.
As a result, this chapter in these instructions does not contain any
information.
How to disassemble and exchange the product is described in chapter 11
"Disassembly and Exchange" on page 35.
11

Disassembly and Exchange

WARNING
High electrical voltage!
Danger of severe injuries or death due to electric shock.

Make sure the relevant system component is not under pressure or
voltage before performing any maintenance or repair work.

Protect the system against being switched on.
High pneumatic pressure!
Danger of severe injuries or death.

Switch off the compressed air supply on the relevant system
component before performing any maintenance or repair work.

Protect the system against being switched on.
Bosch Rexroth AG 35/38