Preparing The Ku 1 Curve For Storage Or Further Use - Bosch Rexroth KU 1 Instrucciones De Montaje

36/38 Bosch Rexroth AG
WARNING
Lifted loads may fall!
Falling objects may result in severe injuries (or even death).

Always use lifting equipment with a suffi ciently high load bearing
capacity (see the shipping documents for product weight).

Before lifting the product, make sure that the carrying straps are
correctly fastened!

Secure the product to prevent toppling while lifting!

Make sure that no one is in the danger area when raising and
lowering, with the exception of the operator!
11.1 Preparing the KU 1 curve for storage or
further use
• Only store the product on a fl at surface.
• For curves with an assembled motor/gearbox combination:
Support the curve so that there is no load on the motor/gearbox
combination.
• Protect the product against environmental infl uences such as
contamination and humidity.
• Protect the product against mechanical infl uences.
• For ambient conditions, see
TS 1 | 3 842 531 106/2013-04

38.