Installation Sequence - Comunello Automation LIWIN Manual De Instrucciones De Uso

6. INSTALLATION
With bottom-hung windows, there is a danger of potential injury resulting from the window accidentally
falling.
It is OBLIGATORY to fit limiting arms (of the Series 1276 type), or an alternative safety system, of a suitable
size to prevent the window from accidentally falling down.
Top-hung outward opening window: Overall dimensions and fixing holes
27
Bottom-hung inward opening window: Overall dimensions and fixing holes
27

6.1 Installation sequence

- Check that the width of the window, where the actuator is due to be fitted, is more than 420 mm. Otherwise, it is
NOT POSSIBLE to fit the actuator.
- Check that the force required to open/close it (calculated according to the table under Point 4.2) is less than or
equal to that shown in the TECHNICAL DATA table.
- Try manually the window opening, checking for and if necessary eliminating any sticking points that could cause
a malfunction.
- Manually test the maximum opening of the window, checking that it is greater than the travel set by the actuator.
30
54.4
Filo Serramento
325
414
414
325
41
27
106.3
27
Filo Serramento
99
55
99.5