Fluke 3563 Guía De Funcionamiento Básico página 21

Getting started with Analysis Vibration Sensor System
Assign sensors to asset test points
1. Tap Assign on the Sensors screen. The asset hierarchy configured in LIVE-Asset™
Portal appears in the Assign Asset screen.
2. Assign selected sensor to desired asset test point.
3. Tap Save to complete the action.
NOTE: If no asset hierarchy has been configured within the LIVE-Asset™ Portal, then
no asset hierarchy will appear when Assign is selected.
On completion, the assigned sensor appears on the sensor list with a breadcrumb
showing the test point within the hierarchy (e.g. Building 1>Wing A>Asset1>Driver
Component>Motor>Test Point1).
To change or unassign a test point, tap the pencil icon (next to the breadcrumb).
This returns user to the individual asset screen where the test point is unassigned by
18
selecting None.