Milnor MilTouch MWF27Z8 Serie Guía Del Operario página 14

Chapter 1. How to Use the MilTouch
1
Chapter
How to Use the MilTouch
BICLUO01 (Published) Book specs- Dates: 20170804 / 20170804 / 20170804 Lang: ENG01 Applic: CLJ
1.1. Using the MilTouch
®
The Milnor MilTouch washer-extractor control system uses a touch-sensitive display screen. All
the functions and information you need to configure, program, and run the machine appear on this
screen.
CAUTION 1 : Avoid Machine Damage—The touch screen works best if you use your finger
to touch it with light or moderate pressure.
• Do not push hard on the glass.
• Use only a finger to touch the glass. Do not touch the screen with a tool.
Supplement 1
The MilTouch Simulator software lets you prepare wash formulas and perform other MilTouch
controller tasks without using the MilTouch control system. The software uses the same
interface as the one on the machine to help you program formulas and manage their
deployment.
The contents of this document apply to both the MilTouch washer-extractor control and the
MilTouch Simulator software, with the following exceptions:
• In the PC software, the displays described in
Displays" do not reflect the state of any real hardware. The PC software does not simulate
inputs and outputs.
• The PC software will not simulate the actions of a formula.
• The PC software allows you to export formulas to any suitable storage device attached to
your computer. The machine control exports to either a USB flash drive or to memory
internal to the controller. See
The Home Display
1.1.1.
You can run any available wash formula from the display in
1. Use the scroll buttons to bring the wash formula onto the screen.
2. Touch the Wash Formula Name button. The button changes color to show that the formula is
selected.
3. Touch the blue Start button.
See Section 1.1.2 for information about the Run display.
PELLERIN MILNOR CORPORATION
™ Control
®
Control
MilTouch Simulator for Windows PCs
Section 1.1.1.6 "The Inputs and Outputs
Section 1.1.1.3 "The Data Transfer Display"
10
™
Control
for details.
Figure 1.