Publicidad
Idiomas disponibles
Idiomas disponibles
K85Ec / KSS80Ec 370
4.5 Changing the saw blade
Use the following procedure to open the
movable guard:
1.
Pull out the power plug of the machine.
2.
Put the disconnected machine on a flat
surface.
3.
Press and hold the pushbutton (8).
4.
Pull the locking lever (3) upwards.
The operating lever is locked. The
➢
mechanism that locks the saw shaft is
activated.
5.
To move the movable guard to the maximum
open position, either use the pre-feed lever
(11) or do it manually. When the locking lever
(3) is pulled, the guard is locked in that
position to make tool change easier.
The movable guard is open.
✓
01/2022
Caution
Risk of injury from the sharp saw blade
The saw blade is sharp. You can hurt yourself when you change the saw blade.
Wear protective gloves when you change the saw blade.
➢
➢
Be careful when you change the saw blade.
Fig. 7: Locking the saw shaft
Fig. 8: Opening the guard
15
Publicidad
