Introduction; General Information; Purpose And Content Of The Instructions; Storage Of Instructions - Casals QUANTICA EEC Manual De Instalación, Operación Y Mantenimiento

1. INTRODUCTION

Units must be installed and operated according to the instructions in this manual. Strict adherence to these simple instructions
is a prerequisite to:
• eliminate or reduce shutdown time due to unexpected failures;
• improve the performance of components, resulting in energy savings;
• increase the life of components and the entire unit;
• decrease maintenance costs.

1.1 General information

This manual has been prepared to allow correct installation, set-up and maintenance of the unit. Any contractual or extra-con-
tractual responsibility of the Company for damage caused to persons, animals or things, due to installation, adjustment and
maintenance errors or improper use, is excluded. Any use other than that specified does not imply for the manufacturer any
commitment or obligation of any kind.
This documentation is an informative support and cannot be considered as a contract towards third parties.
The Company implements a policy of constant improvement and development of its products. It therefore reserves the right
to make changes to specifications, fittings and documentation at any time, without prior notice and without any obligation to
update what has already been delivered.

1.2 Purpose and Content of the Instructions

These instructions provide essential information for the installation, operation, testing and maintenance of the machine. They
have been drawn up in accordance with the legal provisions issued by the European Union and the technical standards in force
at the time the instructions were issued.
The local safety regulations in force at the time of installation must be observed.
The instructions contain instructions for avoiding reasonably foreseeable misuse.

1.3 Storage of instructions

This manual and the eventual wiring diagram of the unit must be carefully stored in a suitable place, protected from dust and
humidity and easily accessible to users and operators for any further consultation.
The instructions must always follow the unit throughout its entire life cycle and must therefore be passed on to any subse-
quent user.

1.4 Instructions update

It is recommended to check that the instructions are up to date with the latest revision available.
Any updates sent to the customer should be retained as an attachment to this manual.
The Company is available to provide any information regarding the use of its products.

1.5 How to use these instructions

The instructions are an integral part of the unit.
It is compulsory for users or operators to consult the instructions before any operation on the unit and on any
occasion of uncertainty regarding the transport, handling, installation, maintenance, use and dismantling of the
unit.
In these instructions, in order to draw the attention of operators and users to the operations to be carried out in
safety, graphic symbols have been included that are shown in the following paragraphs.
EN
06