Loz Measurement (Elimination Of Interference And Induced Voltages); Frequency Measurement; Measurement % Of Duty Cycle (Pulse Filling Indicator) - Sonel CMP-1015-PV Manual De Instrucciones

5.4 LoZ measurement (elimination of interference and
induced voltages)
Measurement function in 'LoZ' mode eliminates the influence or
interference voltages or induced voltages, making the measurement
more accurate and reliable. These voltages may occur due to ca-
pacitive feedback between the live conductors and the unused con-
ductors located in the vicinity:
 set the rotary switch at
 connect black test lead to COM terminal, and red test lead to
VΩLoZV
 contact probe blades to measurement points,
 read the measurement result on the display.

5.5 Frequency measurement

To perform frequency measurement:
 set the rotary switch at Hz%,
 connect black test lead to COM terminal, and red test lead to
VΩLoZV
 contact the tips of test probes to the points of measurement,
 read the measurement result on the display.

5.6 Measurement % of duty cycle (pulse filling indicator)

To perform the measurement:
 set the rotary switch at Hz% or V
 press MODE button, until symbol % is shown on the display,
 connect black test lead to COM terminal, and red test lead to
VΩLoZV
 contact the tips of test probes to the points of measurement,
 read the measurement result on the display (pulse width
56
LoZ
AC+DC
CAP Hz%K-Temp,
CAP Hz%K-Temp terminal,
CAP Hz%K-Temp terminal,
CMP-1015-PV – USER MANUAL
,
,
AC+DC
).