Programmable Functions - Breville the Dual Boiler BES920 Manual De Instrucciones

PROGRAMMABLE FUNCTIONS

To enter program mode, press the MENU
button. Continue to press MENU button until
the desired function is flashing on the LCD.
Program mode allows you to program:
• Shot Volume
• Shot Temperature
• Auto Start
• Clean Cycle
• Set Clock
To exit program mode, press EXIT button.
NOTE
The MENU button is disabled during an
extraction or when dispensing hot water.
REPROGRAMMING SHOT DURATION
The 1 CUP and 2 CUP buttons use duration to
control espresso volume. Reprogram the preset
30 second duration to your preference.
Press MENU button until 'SHOT VOL'
flashes and either '1 CUP' or '2 CUP' is
displayed, depending on the button you'd like
to reprogram.
Without the portafilter in place, press the
button you'd like to reprogram (either 1 CUP
or 2 CUP button) to start water flow from the
group head. Using the shot clock on the LCD,
press the 1 CUP or 2 CUP button once the
required duration has been reached.
Reprogramming 1 CUP button
Reprogramming 2 CUP button
The machine will beep. Press the EXIT button
to set the new duration.
REPROGRAMMING SHOT VOLUME
The 1 CUP and 2 CUP buttons use duration to
control espresso volume. Access the Advanced
Features if you wish to use volumetric controls
instead of duration to determine espresso
volume (refer to 'Volumetric Control (vOL)',
page 17). Then follow these instructions:
Press MENU button until 'SHOT VOL'
flashes and either '1 CUP' or '2 CUP' is
displayed, depending on the button you'd like
to reprogram.
Dose & tamp the portafilter with ground coffee.
Insert the portafilter into the group head. Press
the button you'd like to reprogram (either
1 CUP or 2 CUP button) to start espresso
extraction. Press the 1 CUP or 2 CUP button
once the desired volume of espresso has been
extracted. The machine will beep. Press the
EXIT button to set the new volume.
13