Troubleshooting - Breville the Dual Boiler BES920 Manual De Instrucciones

Troubleshooting

PROBLEM
The HOT WATER
LED flashes when the
machine is turned on
Machine beeps when
turned on
Water does not flow
from the group head
FILL TANK on LCD, but
water tank is full
No steam or hot water
No hot water
No steam
The machine is on but
ceases to operate
POSSIBLE CAUSES
• HOT WATER dial is OPEN.
• STEAM LEVER is OPEN or
has been activated before
the machine has reached
operating temperature.
• Machine has not reached
operating temperature.
• Water tank is empty.
• Water tank is not fully
inserted and locked
into position.
• Water tank is not fully
inserted and locked
into position.
• Machine is not turned on.
• Water tank is empty.
• Steam wand is blocked.
WHAT TO DO
Turn the HOT WATER dial
to the CLOSED position.
Move the STEAM LEVER to
the CLOSED position.
Allow time for the machine
to reach operating
temperature.
The POWER button will
stop flashing when machine
is ready.
Fill tank.
Push water tank in fully and
lock latch closed.
Push water tank in fully and
lock latch closed.
Ensure the machine is
plugged in and the POWER
button is on.
Fill water tank.
Use the pin on the end of
the provided cleaning tool.
If steam wand remains
blocked, remove the tip
using the integrated spanner
in the cleaning tool and soak
in hot water. Screw tip back
onto the steam wand using
the integrated spanner in the
cleaning tool.
Turn machine off. Wait
for 60 minutes and turn
machine back on. If problem
persists, call Breville
Consumer Support.
27