Pre-Infusion Programming - Breville the Dual Boiler BES920 Manual De Instrucciones

Machine Audio (Snd)
Adjust the audible alerts. While 'Snd' is
displayed on the LCD, press MENU button.
Press UP or DOWN arrow to off (OFF),
low(LO) or high (HI). Press MENU button to
set. Depending on the selected setting, the
machine may beep to confirm selection.
Volumetric Control (vOL)
Select between volume based (FLo) or
time based (SEc) method for espresso dose
measurement. While 'vOL' is displayed on
the LCD, press MENU button. Press UP or
DOWN arrow to the desired method. Press
MENU button to set. Machine will beep to
confirm selection.

PRE-INFUSION PROGRAMMING

With the machine on and in STANDBY mode,
press UP and DOWN arrow together to enter
Pre-Infusion Programming mode.Press MENU
button to move between Pre-Infusion Duration
(Pd) and Pre-Infusion Power (PP).
Pre-Infusion Duration (Pd)
The LCD will display the current Pre-Infusion
Duration. Press UP or DOWN arrow to
vary time.
We recommend a range between 5–15 secs as
being optimum. Press MENU button to access
Pre-Infusion Power or press EXIT button to set.
Pre-Infusion Power (PP)
The LCD will display current Pre-Infusion
Power. Press UP or DOWN arrow to
vary power.
We recommend a range between 55-65 as
being optimum. Press EXIT button to set.
ALERTS
STEAM LEVER beeps during heat-up
The machine will beep 3 times and not
reach operating temperature (STANDBY
mode) if the STEAM LEVER is in the OPEN
position. Move the STEAM LEVER to the
CLOSED position.
17