Possible Problems - Campingaz PARTY GRILL 600 Instrucciones De Empleo

• If the appliance will not be used for a long period of time, disconnect the cylinder as indicated in section § F.
• Regularly check the condition of the hose and change it if it shows signs of ageing or cracking (see section § C-2).
• In the case of the injector becoming clogged (the cylinder still contains gas but the appliance will not light), do not try
to unclog it yourself. Return the appliance to your retailer.
H - POSSIBLE PROBLEMS / cORREcTIVE AcTION

Possible problems

The burner does not light up
The burner does not burn smoothly or goes
out
Unstable blowing flames
Large plume of flame on the burner surface
Flame at the injector
GB
Burning leak around a union
Insufficient heat
Burning leak behind the adjustment knob
Probable causes / corrective action
• Poor gas supply
• regulator not operating properly
• Pipe, valve, venturi tube or burner holes obstructed
• Clean the venturi
• Check that gas is present
• Check the pipe connection
• Contact your servicing agent.
• New cylinder may contain air. Allow the appliance to operate and
the fault will clear itself
• Residual water, following the washing of the burner caps
• Contact your servicing agent.
• The venturi is obstructed (possibly cobwebs)
• Contact your servicing agent.
• The cylinder is almost empty
• Change the cylinder and the fault will clear itself
• Contact your servicing agent.
• Shut off the gas supply immediately
• Leaking union: tighten nuts or change pipe
• Contact your servicing agent.
• Injector or venturi tube obstructed
• Contact your servicing agent.
• Clean the venturi
• Defective valve
• Shut down the stove
• Contact your servicing agent.
14