Lo-fi effects
(P.197)
LOFI Compress
(P.197)
Bit Crusher
LOFI Compress
Degrades the sound quality.
Parameter
1, 2, 3, 4, 5, 6
Pre Filter Type
1, 2, 3, 4, 5, 6, 7, 8, 9
LoFi Type
OFF, LPF, HPF
Post Filter
Type
Post Filter
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000,
Cutoff
2500, 3150, 4000, 5000, 6300, 8000 [Hz]
Low Gain
-15–+15 [dB]
High Gain
-15–+15 [dB]
D100:0W–D0:100W
Balance (*1)
Level
0–127
*1: This parameter corresponds to MFX Ctrl. For details, refer to
Ctrl)(P.203)".
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to
EFFECT (MASTER EFFECT
CTRL)(P.204)".
Bit Crusher
This creates a lo-fi sound.
Parameter
Sample Rate (*1)
Bit Down
Filter
Low Gain
Value
"Control del MFX con los mandos PAD EDIT [1] [2] (MFX
Value
0–127
0–20
0–127
-15–+15 [dB]
Explanation
Selects the type of filter applied to the sound before
it passes through the Lo-Fi effect.
1: Compressor off
2–6: Compressor on
Degrades the sound quality. The sound quality grows
poorer as this value is increased.
Selects the type of filter applied to the sound after it
passes through the Lo-Fi effect.
OFF: No filter is used.
LPF: Cuts the frequency range above the Cutoff Freq
HPF: Cuts the frequency range below the Cutoff Freq
Basic frequency of the Post Filter
Gain of the low range
Gain of the high range
Volume balance between the direct sound (D) and
the effect sound (W)
Output Level
"Control del MASTER EFFECT con el mando MASTER
Explanation
Adjusts the sample rate.
Adjusts the bit depth.
Adjusts the filter depth.
Gain of the low range
Effect List (English)
197