Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT INSTALLATION
Before Installation
IMPORTANT:
Please be advised that the provided cold water T-Valve
should be installed at the fill valve under the toilet tank,
and NOT at the cold water supply coming from the wall.
NOTE: The hot water T-Valve will be installed at the
hot water supply under your bathroom sink. If you
do not have access to the fill valve under the toilet
tank, visit us at www.brondell.com or contact us at
1-888-542-3355 for further assistance.
For SMB-25 Dual Temperature Model Only: Check
the size of the hot water supply connection (most
likely under the sink/wash basin). This should be a ⅜"
connection to properly fit and install enclosed T-valve.
NOTE: If the connection is a ½" connection, you
will need to purchase the following reducing
adapter available online and at many plumbing
hardware stores:
x ⅜" Male Compression
Check Water Supply Line
Check the water supply line that connects the toilet tank fill
valve to the water shutoff valve at the wall. If it is a rigid
pipe, you will need to purchase a flexible water supply
hose to replace it before installing the Side-Mounted
Attachable Bidet with Adjustable Spray Wand. The length
of the hose may vary, and the top connection size should
be ⅞" ballcock to connect to the T-valve that you will install
under the toilet tank. The bottom connection will vary
(most common are ⅜" and ½" female compression).
4
Reducing Adapter, ½" Female NPT
Cold Water Supply
INCORRECT
Fill Valve
CORRECT
Publicidad
